Hello Guest it is July 11, 2025, 09:28:03 AM

Author Topic: digitiseing  (Read 4735 times)

0 Members and 1 Guest are viewing this topic.

judah

*
digitiseing
« on: November 28, 2006, 10:20:10 PM »
after you have digitised your part how do you get mach to cut that part
Re: digitiseing
« Reply #1 on: November 29, 2006, 12:09:50 AM »
You need a cad/cam program that can take in a point cloud... it is not much fun :(
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com