Sorry for the delay, I did not see the post.
you can call a VB command to either set a Userlabel,LED,DRO OR write to a text file which Flash then could load.
I.E.
loadSettings =
'value = GetParam("Boundry")'+"\r"+
'if value = 1 then'+"\r"+
'SetUserLED(1816,1)'+"\r"+
'else'+"\r"+
'SetUserLED(1816,0)'+"\r"+
'end if'
fscommand("VBMacro", loadSettings);
Let me know if you want to read a file in Flash will give an example.