Hello Guest it is November 26, 2021, 09:28:36 PM

Author Topic: Backlash ON problem Y axis  (Read 2425 times)

0 Members and 1 Guest are viewing this topic.

Backlash ON problem Y axis
« on: November 22, 2006, 01:24:18 PM »
If Backlash ON and Axis Y move to more cca 15mm,speed for Y is not OK -> crash (lost steps). Tested on Mach2 and Mach3 - 2.00.12 on different computer and machines.
Re: Backlash ON problem Y axis
« Reply #1 on: November 24, 2006, 01:16:11 PM »
What do you have the backlash % speed correction set to? try setting it down to about 10% and see if you still have the problem
Fixing problems one post at a time ;)