Hi all, i have just replaced my steppers with servos and rewired my electrics  and fired up for the first time this evening. The Z axis homes as it should but the X and Y axis try to home in the opposite direction to the way they should. ie left to right and front to back. Also if you press the X+ or X- jog buittons they both move the axis in the same direction. This applies to the Y axis as well. If i switch off the auto override limits button  then i cannot jog the X or Y axis at all. The DRO reads negatively when it should read positively as well. I have obviously cocked up somewhere  and i may be missing something simple but any help greatly appreciated.