Hello Guest it is June 17, 2019, 03:50:32 AM

Author Topic: Feed Hold (pause) ERROR - Please Help  (Read 1690 times)

0 Members and 1 Guest are viewing this topic.

Feed Hold (pause) ERROR - Please Help
« on: July 15, 2012, 09:12:22 PM »
Hello, I have a plasma CNC table... the machine works fine the problem is when I use the Feed Hold and then when I hit the Cycle Start buton the machine goes crazy and moves in wrong direction.

My Mach3 is Ver. 3.043.062 and yes is full licenced

I make a video of this problem: http://www.youtube.com/watch?v=pD3PCP3r2gs
Re: Feed Hold (pause) ERROR - Please Help
« Reply #1 on: July 15, 2012, 11:10:29 PM »
SOLVED - just change DISTANCE MODE and IJ MODE to ABSOLUTE, and then change to absolute in my CAM Software too
Re: Feed Hold (pause) ERROR - Please Help
« Reply #2 on: March 31, 2015, 02:29:58 PM »
Are you still online man?