Hello Guest it is October 31, 2024, 07:10:51 PM

Author Topic: Issue and EStop in a macro  (Read 3788 times)

0 Members and 1 Guest are viewing this topic.

Issue and EStop in a macro
« on: February 10, 2011, 12:52:22 PM »
How do I issue an estop in a macro? I'm working with my tool changer and I need to setup some safety lines of code.

I thought I could make a Brain that when I activate an unused output (output20) that it would trigger an estop. Then I put:

ActivateSignal(OUTPUT20)

in a test macro (M99.m1s). When I type M99 in MDI I get an error saying:

Return Called with no Sub in effect...looping

What does this mean? I looked at M5.m1s and all it has in it is:

DoSpinStop()

This macro seems to work, why wont mine?

Thanks,

Aero
Re: Issue and EStop in a macro
« Reply #1 on: February 10, 2011, 02:37:03 PM »
Dobutton(21)

For anyone that wants to know :)


Aero

Offline ger21

*
  • *
  •  6,295 6,295
    • The CNC Woodworker
Re: Issue and EStop in a macro
« Reply #2 on: February 10, 2011, 05:24:00 PM »
Or DoOEMButton(1021)
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Issue and EStop in a macro
« Reply #3 on: February 10, 2011, 08:49:42 PM »
I made a couple Brains that look at some inputs to turn the estop off (low lube, air pressure and a door switch). But when I enable them I can't use my main estop switch.

Say for example I have my air switch on OEMTRIG#3, I go into Brain Edit and use that input first, then I use the "No Operation" then I terminate it with input "EStop". After I enable these Brains they all work GREAT!! but my (external) e-stop button quits working.


Any help would be great!!

Aero


P.S. I would use the hotkey menu, but I noticed that if one gets triggered you can reset and the machine comes back on, I want it to stay off tell I fix whats wrong with it.