I have no problems with the size. Size is spot on for what I measure for when I cut. With the controller I had in the box that is the highest I can set the velocity before it chokes. Even with the one I had before I burnt it up talking about in the other thread. That is why I was asking about speed and then learned I really don't know enough.
I don't understand enough to know what motor is needed for what type of use or many of the answers everyone asking me in that other thread. So I have been reading a lot and trying to get a better understanding and keep realizing how little I really know.
Figure can't go wrong with the G540. For now I have a 36v 10amp power supply until I can afford anything bigger. Need to get a better understanding of my motor needs before doing anything else. I know what I will use the machine for but not sure how to figure out my motor needs.
I am going to order the G540 this coming payday. Wish I could order it today and have it before the weekend.
Currently reading the documents for it from here -
http://www.geckodrive.com/product.aspx?i=14469Thanks