Hello Guest it is March 28, 2024, 07:59:03 AM

Author Topic: PID motor tuning  (Read 3309 times)

0 Members and 1 Guest are viewing this topic.

PID motor tuning
« on: November 15, 2006, 04:12:31 PM »
Hi,

Can we add PID control in motor tuning of MACH using VB code? This will make servo drive simpler.

Ahmed
Re: PID motor tuning
« Reply #1 on: November 17, 2006, 08:45:11 AM »
Nope :(
VB will only run at about 4 times a sec ...

Sorry
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: PID motor tuning
« Reply #2 on: November 17, 2006, 11:59:39 AM »
Any other possibility to add PID in motor tuning

Ahmed

Offline chad

*
  • *
  •  361 361
  • When the going gets weird, the weird turn pro.
    • View Profile
Re: PID motor tuning
« Reply #3 on: November 17, 2006, 03:20:42 PM »
There is really no compelling reason to try to do it in mach. PID is better suited to the servo drivers and let mach just do what it is designed to do and output pulses.

Chad