Hello Guest it is March 29, 2024, 11:03:06 AM

Author Topic: Brushless motor as a spindle ... And controll it with mach3  (Read 7030 times)

0 Members and 1 Guest are viewing this topic.

Re: Brushless motor as a spindle ... And controll it with mach3
« Reply #10 on: January 11, 2014, 10:42:31 PM »
Yes, it look pretty much like that. Maybe worth a try.
Correction : 1 to 2 msec pulsewidth PWM ( not 1.5 to 2.5 as I mentioned before ) where 1.5 is the middle.
For some fun I tested it with a Pokeys56U, and yes its working. :)
Alex


Re: Brushless motor as a spindle ... And controll it with mach3
« Reply #11 on: January 12, 2014, 06:21:06 AM »
Ok thnx for the answers  I will try .. And I will  inform about the results
Re: Brushless motor as a spindle ... And controll it with mach3
« Reply #12 on: January 16, 2014, 04:11:32 PM »
Look ....... I have run the brushless .. Success ....

http://m.youtube.com/watch?v=R8BNassPiqs&feature=c4-feed-u
Re: Brushless motor as a spindle ... And controll it with mach3
« Reply #13 on: January 16, 2014, 07:11:46 PM »
 :)
Alex