Hello Guest it is April 14, 2021, 11:11:13 PM

Author Topic: velocity setting  (Read 5788 times)

0 Members and 1 Guest are viewing this topic.

Re: velocity setting
« Reply #10 on: January 05, 2011, 01:33:38 PM »
I did that too. I grounded everything together to the CNC machine. I grounded the stepper driver and SS to the machine.
Re: velocity setting
« Reply #11 on: January 05, 2011, 01:38:19 PM »
I have ran a couple of small jobs today and it worked. But the problem has been so intermittent I am not sure if it is good or not.

The board I bought from Keling did not come with documentation but I found great documentation with screen shots of the mach settings that I downloaded elsewhere. Hoping it keeps chugging along like it has on these couple of small jobs.

Attached is a pic of one of the small jobs I ran.

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: velocity setting
« Reply #12 on: January 05, 2011, 01:40:40 PM »
Well hopefully the new BOB will cure it.

Nice wee crab, used to make my living catching them and lobsters :)
Hood
Re: velocity setting
« Reply #13 on: January 05, 2011, 01:44:01 PM »
Cool -
I didn't make a living at it but I grew up in the Chesapeake Bay area in MD for most of my child hood. Loved going crabbing each summer. :)
Re: velocity setting
« Reply #14 on: January 05, 2011, 01:44:42 PM »
I am going to attempt my first inlay pattern. I have seen people do inlays on things, now it's my turn to try. :)

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: velocity setting
« Reply #15 on: January 05, 2011, 01:51:17 PM »
I still kind of miss the fishing but when I think about the 40ft waves and getting soaked with icy water I soon realise the workshops a better place ;D

Hood
Re: velocity setting
« Reply #16 on: January 05, 2011, 01:55:03 PM »
Funny -
I have never been where there are 40ft waves. That has to be an experience all by itself.

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: velocity setting
« Reply #17 on: January 05, 2011, 02:02:43 PM »
Ha ha even my workshop experiences them once or twice a year ;D
Re: velocity setting
« Reply #18 on: January 05, 2011, 02:55:08 PM »
Let's hope it keeps working like this and I don't have any more problems. :)

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: velocity setting
« Reply #19 on: January 05, 2011, 05:47:13 PM »
Heres hoping, looking good so far :)