Hello Guest it is September 21, 2019, 07:50:49 AM

Author Topic: New development version  (Read 3745 times)

0 Members and 1 Guest are viewing this topic.

New development version
« on: January 23, 2011, 02:37:51 PM »
Hi all,

I just noticed that the development version jumped from 3.043.22 to 3.043.26.
Does anybody know what's new in it?

(Is there a place where to find information about development versions like a change-log?)

regards, Konrad
Re: New development version
« Reply #1 on: January 23, 2011, 03:08:19 PM »
Hi all,

I just noticed that the development version jumped from 3.043.22 to 3.043.26.
Does anybody know what's new in it?

(Is there a place where to find information about development versions like a change-log?)

regards, Konrad

And the link to the lockdown version now delivers the 3.043.22, which was the old development version, and the change-log doesn't mention it.

--> Reason of my stupid questions: I am working on a screenset and I am suffering from trouble with the update of LEDs.
I am wondering wether the new versions could deliver a solution for this trouble, as they were used to develope the all new "mach standard mill" screenset.
On the other hand, I want to avoid paying for this with other, new trouble coming with the development version...

Thanks for your hints...

best regards,
Konrad

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: New development version
« Reply #2 on: January 23, 2011, 03:15:21 PM »
What sort of LED problem are you having? And what version are you using?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: New development version
« Reply #3 on: January 23, 2011, 03:22:42 PM »
Hi Gerry,

version is 3.042.40.

Trouble is, that sometimes some LEDs are showing a wrong state - so they do not update correctly.

I've got this trouble on cycle start and axis ref'd LEDs.

regard, konrad

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: New development version
« Reply #4 on: January 23, 2011, 04:26:38 PM »
Do you have image buttons on top of them?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Hood

*
  •  25,853 25,853
  • Carnoustie, Scotland
    • View Profile
Re: New development version
« Reply #5 on: January 23, 2011, 05:12:39 PM »
I dont know but I think the new version may just be because a change was made to the G Code list for G28 description, downloading now to see if it has changed.
Hood

Offline Hood

*
  •  25,853 25,853
  • Carnoustie, Scotland
    • View Profile
Re: New development version
« Reply #6 on: January 23, 2011, 05:17:59 PM »
Oh well G28 wording looks the same so obviously not that.
Hood
Re: New development version
« Reply #7 on: January 23, 2011, 05:27:33 PM »
OK, that's it...
There's a transparent image button in front of the led.

The behavior is the same on version 3.043.22.

Do you know a way to cure it?

 

Offline Hood

*
  •  25,853 25,853
  • Carnoustie, Scotland
    • View Profile
Re: New development version
« Reply #8 on: January 23, 2011, 05:41:35 PM »
Only way I know  is to have the button below the LED or if you have LEDs like I have, in other words the LEDs look like buttons with a LED in the corner you can have the invisible button over half the button, see screenshot of my screen in screen4 for what I mean.
Gerry may know another way though as he has been doing a lot with screensets recently.
Hood