Hello Guest it is June 19, 2019, 11:47:41 PM

Author Topic: Axis won't move continuous  (Read 3484 times)

0 Members and 1 Guest are viewing this topic.

Axis won't move continuous
« Reply #10 on: December 27, 2010, 10:00:57 PM »
Yes.

Offline Hood

*
  •  25,844 25,844
  • Carnoustie, Scotland
    • View Profile
Re: Axis won't move continuous
« Reply #11 on: December 28, 2010, 07:12:39 AM »
Can you attach your xml please and I will see if I can find a problem there.
Hood
Re: Axis won't move continuous
« Reply #12 on: December 28, 2010, 09:19:00 AM »
I figured it out.

It seems to work properly when I turn on "Charge Pump on in estop"

I thought that disabled the gecko when you activated the reset on the screen. Now when you activate the reset on the screen the drives/motors are still powered up. Thinking about it it makes since though, now the motors are still holding their position while mach is not giving them a command.

Why would that effect the external e-stop?

Offline Hood

*
  •  25,844 25,844
  • Carnoustie, Scotland
    • View Profile
Re: Axis won't move continuous
« Reply #13 on: December 28, 2010, 09:42:04 AM »
I dont know but may be something to do with the way the G540 works.
Hood