Yesterday, I had the opportunity to take advantage of the LOCAL SYSTEM ROTATED feature as offered on the MDI screen. I rotated to 180 deg. To my surprise and to the breaking of a tool, both the STOP and GO-TO-ZERO functions did not use SAFE Z. After double checking the safe Z status, I confirmed that the Z axis did not change from its current position when using either of these functions. After rotating back to 0.00 degrees, operation returned to normal. I did not try any other angle.
Is this the correct operation? I am using the latest locked-down version (Mach3 R3.042.040)
Thanks, Bill