Hello Guest it is November 22, 2019, 02:03:13 AM

Author Topic: new version mach3 no dxfimport?  (Read 2928 times)

0 Members and 1 Guest are viewing this topic.

new version mach3 no dxfimport?
« on: November 26, 2010, 07:46:38 AM »
I using old version mach3 1.84 with the dxfimport, but now try the new version 3.04.40 only got Lazycam import, can i copy the old version dxfimport.exe to replace the Lazycam? because I need very simple convert dxf to g only, please help?

Offline Tweakie.CNC

*
  • *
  •  8,009 8,009
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: new version mach3 no dxfimport?
« Reply #1 on: November 26, 2010, 08:02:21 AM »
I think the only way to keep the direct DXF import is to keep using the earlier version of Mach.
However I can't see any reason why you can't have both versions on the same PC and then use which ever version you choose.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: new version mach3 no dxfimport?
« Reply #2 on: November 26, 2010, 08:12:06 AM »
thank a lot

Offline Hood

*
  •  25,856 25,856
  • Carnoustie, Scotland
    • View Profile
Re: new version mach3 no dxfimport?
« Reply #3 on: November 26, 2010, 11:27:50 AM »
If you do as Tweakie suggests make sure you install the older version to a different directory and Don't install the driver or you will overwrite the newer driver and will likely have problems.
Hood