Hello Guest it is March 29, 2024, 04:46:32 AM

Author Topic: Feature request Debug Tool  (Read 4501 times)

0 Members and 1 Guest are viewing this topic.

Feature request Debug Tool
« on: July 14, 2011, 09:58:24 AM »
When using the debug tool, it would be nice if  the tool X and Z coordinates were indicated after a debug location has been selected.

In use, as I click along the path, a box would show up adjacent to the tool, indicating the X and Z of the tip. This feature would aid in knowing that the correct tool path was selected for examination.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Feature request Debug Tool
« Reply #1 on: July 14, 2011, 06:04:42 PM »
The tip center is wherever you place your crosshair, and if you don't move the mouse , you will see  Z &X location in the lower left hand corner of the screen.
Note that debug applies to what ever tool is currently selected. It dosn't automaticaly select the tool associated with a selected Toolpath. In fact it dosen't even need a toolpath.

Art ended the development work on LT but nothing wrong with posting desires ....never know.
RICH