Hello Guest it is January 16, 2022, 05:10:16 AM

Author Topic: Motors work right when windows starts up and then stop after a minute or two  (Read 2229 times)

0 Members and 1 Guest are viewing this topic.

I recently bought mach 3 and a Fireball cnc maching with motors from Probotix.  I am having trouble getting the motors to run. 

If I start up windows and fire up mach 3 right away and jog the motors they run perfectly and nice and smooth.  Then after a little while they start making alot of noise and move in jerky steps.  I tried going through the windows xp setup on the machsupport website and it still acts weird.

I am running it on a desktop computer with a 1.8ghz AMD Athlon XP 2200 processor and 1GB of RAM.

Offline Hood

  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
What does the driver test look like when you run it? What kernel do you have set?

Offline RICH

  • *
  •  7,421 7,421
    • View Profile
Post info on the motor drives  or controller you are using.

Offline Tweakie.CNC

  • *
  •  8,878 8,878
  • Super Kitty
    • View Profile

Is anything getting hot ?