Hello Guest it is March 28, 2024, 10:13:30 AM

Author Topic: so why does mach3 alter my gcode!  (Read 3416 times)

0 Members and 1 Guest are viewing this topic.

so why does mach3 alter my gcode!
« on: October 17, 2010, 03:46:14 PM »
my code comes up fine on my cam preview and other mach driven mill.
the mill i want to use comes up with its own version of my gcode!!!!!
what makes it do this???????????????????????????????????

this code is off the same thumb drive
what it is supposed to look like.


and this is the super magic mach3 version it thinks i cant live without!


Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: so why does mach3 alter my gcode!
« Reply #1 on: October 17, 2010, 04:07:22 PM »
General Config change the IJ mode.
Hood
Re: so why does mach3 alter my gcode!
« Reply #2 on: October 17, 2010, 06:10:27 PM »
nice, thanks
what does ij stand for?

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: so why does mach3 alter my gcode!
« Reply #3 on: October 17, 2010, 07:18:02 PM »
I is the location of the starting point of the arc and J defines where the arc center is from the starting point. Note that  there is Absolute
distance mode ( G90 ) and also Incremental distance mode ( G91 ).

RICH

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: so why does mach3 alter my gcode!
« Reply #4 on: October 17, 2010, 08:00:07 PM »
Sorry Rich, but that's not correct.

I is the X coordinate of the arc center, and J is the Y coordinate of the arc center. In absolute IJ mode, they specify the actual arc center. In Incremental IJ mode, they are relative to the start of the arc.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: so why does mach3 alter my gcode!
« Reply #5 on: October 17, 2010, 08:58:05 PM »
Thanks Gerry,
Glad somebody keeps me straight ........... ;)
RICH