Hello Guest it is June 24, 2019, 08:16:32 AM

Author Topic: BUTTON QUESTION  (Read 1762 times)

0 Members and 1 Guest are viewing this topic.

BUTTON QUESTION
« on: September 25, 2010, 08:00:52 PM »
HI GUYS, DOES ANYBODY KNOW HOW CAN I CREATE A BUTTON TO JOG AN AXIS INDEFINETLY.

THANKS IN ADVANCE. :)

Offline BR549

*
  •  6,873 6,873
    • View Profile
Re: BUTTON QUESTION
« Reply #1 on: September 25, 2010, 08:34:00 PM »
SUre but NOT while doing anything else like running gcode(;-)

(;-) TP
Re: BUTTON QUESTION
« Reply #2 on: September 25, 2010, 09:41:47 PM »
ITS NOT TO RUN ANY CODE IS JUST TO CONVERT A PC ON A HIGH SPEED (45KHZ) STEP GENERATOR FOR A CUSTOM MACHINE WICH USES AN STEPPER MOTOR TO MAKE ITS WORK, ALSO IS IT POSSIBLE TO JOG ALL X,Y,Z,A,B,C AND HAVE INDEPENDENT FEED CONTROL ON EACH OR JUST A GENERAL FEED CONTROL FOR ALL OR THE ONES THAT YOU ACTIVATED TOGETHER FROM 1 TO 6?

Offline BR549

*
  •  6,873 6,873
    • View Profile
Re: BUTTON QUESTION
« Reply #3 on: September 26, 2010, 12:32:28 AM »
ITS NOT TO RUN ANY CODE IS JUST TO CONVERT A PC ON A HIGH SPEED (45KHZ) STEP GENERATOR FOR A CUSTOM MACHINE WICH USES AN STEPPER MOTOR TO MAKE ITS WORK,

** OK


ALSO IS IT POSSIBLE TO JOG ALL X,Y,Z,A,B,C AND HAVE INDEPENDENT FEED CONTROL ON EACH

** NO


 OR JUST A GENERAL FEED CONTROL FOR ALL OR THE ONES THAT YOU ACTIVATED TOGETHER FROM 1 TO 6?

** SORTA