Hello Guest it is June 28, 2022, 01:50:00 PM

Author Topic: GCode Prologue from CAM...  (Read 1692 times)

0 Members and 1 Guest are viewing this topic.

GCode Prologue from CAM...
« on: September 23, 2010, 08:25:49 AM »
Please forgive me if this has been answered before.... but...

Currently my CAM (VisualMill) generates the prologue gcodes all on one line.  I had heard/remember that Mach didn't deal with this kind of coding at some point in the past.

Does the newer versions handle this?  I could test this except my CAD/CAM machines are not at the same physical location as my Mach machine.

Stan