Hello Guest it is May 18, 2021, 09:52:19 PM

Author Topic: N00b 2.5D Question  (Read 2311 times)

0 Members and 1 Guest are viewing this topic.

N00b 2.5D Question
« on: September 05, 2010, 08:53:24 PM »
Hi All -

I'm setting up a 2.5D system (manual Z-axis) and was trying to find a way to get Mach3 to pause and wait for input when it gets a command to
move in Z.  I'm sure there's got to be a configuration button somewhere obvious, but I'm totally missing it.  Can y'all give me a shove in the
right direction?



Offline Hood

  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: N00b 2.5D Question
« Reply #1 on: September 06, 2010, 02:13:02 AM »
This has been asked quite a few times from memory and I dont think I recall seeing a way to do it in Mach. Easiest way would be to use a text editor and do a search and replace in you code, seqarch for the Z moves and replace with a M1

Re: N00b 2.5D Question
« Reply #2 on: September 11, 2010, 08:41:46 PM »
can you do this with a tool change instead?