However, could you please point out for me where your code is sensing when the two wires for closing the circuit touch? I still do not see any evidence of this.
mmmmm...
as far as today... my learning curve for this has been ,
by learning in forums and watching youtube videos ,
the machine came with no manuals , and the modified version of mach3 have some different configuration
to be onest .............I have no clue
i added this commands by taking some notes and modifying some scripts found elsewhere..
they only sended this script ,
'probe z surface macro
FeedCurrent = GetOemDRO(818) 'Get the current settings, OEM DROs (818)=Feedrate DRO
ZCurrent = GetOemDro(802) 'OEM DROs (802)=Z DRO
GageH = GetOEMDRO(1001) 'OEMDRO(1001)=Gage Block Height
ZNew = ZCurrent - 300 'probe down 20 mm
Code "G90F200" 'slow feed rate to 200 MM/MIN
SetOemDRO(818,200)
Rem Code "G4 P1" 'Pause 1 second to give time to position probe plate
Code "G31 Z" &ZNew
While IsMoving()
Sleep(10)
Wend
Call SetDro (2,GageH) 'DRO(2)=Z DRO
FinalMove = GageH + 10
Code "G0 Z" &FinalMove
Code "F" &FeedCurrent 'restore starting feed rate
SetOemDRO(818,FeedCurrent)
---------------------------------------------------------------------------
sensing the closing cicuit ? i have been trying to learn what every command does or what it is for....but i also cant find it..