I'm setting up a DMC-2143 board. Using the GalilTools program, you can monitor the state of inputs, outputs, etc.
No matter what I change, Inputs #1-8 and Home Inputs show that they are "On" (green box with a 1). If I ground the pins, they change state (Red box with a 0), so I know I have it set in a working fashion.
However, for the high and low limits, if I click "config Galil limits active low" in the PlugIn configuration, these all change to off as the defualt state. I click the same box for the Homes inputs, but they remain On regardless.
Is this normal? I generally use a ground to turn inputs and homes on/active. Is this possible with a Galil with settings, or do I have to use pull down resistors to force them low (off) as a normal state?