Quote from: jekran on June 29, 2010, 05:13:23 AM

i notice that in mach3 turn when i bup up the feed rate while it is in g1 it will set after a g0 do you know why ?

No FRO on Queue option set?

Hood

i did try it but with no luck the only thing that i set was (look ahead 20lines) i adjust it to 1 and then after that code line it will bup up but you still have to wait for the other line then

Can you attach your xml please.
Hood

how can i upload a XML file i made a copy with a pendrive but i dint know how to upload in the forum  page

i think here is the file

Ok first thing is uncheck No FRO on Queue
Then if it still doesnt work then I think you may have an issue with the screenset as I can adjust the FRO no problem with my own screenset but the standard Turn one doesnt seem to work.
Will have a look see if I can find the issue with the standard screenset.
Hood

Ok seems to be the OEM for increment feedrate that the turn screen uses are acting weird. On my screen I use OEM108 and OEM109 and it works as it should so try this screenset and see if it works.
Hood

dear hood
it worked perfect !!!!!!!!!
many thanks for your help

No probs, will note this down and make sure that when/if Brian ever gets on to Rev4 Turn it will be fixed.
Hood