Hello Guest it is December 01, 2021, 11:09:40 AM

Author Topic: GCODE/Mach3 Make Sound  (Read 3763 times)

0 Members and 1 Guest are viewing this topic.

GCODE/Mach3 Make Sound
« on: July 01, 2010, 10:47:32 AM »
Hi all,
Bit of a random thought, is it possible to add a line of code at the end of the GCODE programme created by MeshCAM to activate a sound? Obviously speakers etc attached and all setup correctly. We run a program which takes about 10 mins but is in a different room, this would really help us if it is possible?
Many thanks

Offline BR549

  •  6,952 6,952
    • View Profile
Re: GCODE/Mach3 Make Sound
« Reply #1 on: July 01, 2010, 11:48:32 AM »
Turn on the speak feature in Config.

Then create a macro say M911

Speak" OK I am done come take care of Me"

Now mod the post to include the M911 call at the end of the code before the M30.