Author Topic: Phone support  (Read 3480 times)

0 Members and 1 Guest are viewing this topic.

Offline Flyer5

  • Active Member
  • Posts: 4
    • View Profile
Phone support
« on: June 29, 2010, 05:13:10 PM »
Please call me  , Hrs are 7- 5 mon thru fri leisurelinestoves@gmail.com /Mach 3 w mach motion bo board and drives  . Thanks Dave

Offline RICH

  • Global Moderator
  • *
  • Posts: 7,300
    • View Profile
Re: Phone support
« Reply #1 on: June 29, 2010, 10:16:58 PM »
????? Are you offering support or requesting it?????

RICH

Offline mantisworx

  • Holding
  • Posts: 1
    • View Profile
Re: Phone support
« Reply #2 on: June 29, 2010, 11:26:20 PM »
please call me, i am having issues with breaking endmills, the spindle seems to have two speeds no matter what RPM's are in the program if i hit reset it goes slower and i suspect that for some reason this is breaking endmills. with only .035 depth of cut in aluminum (.062 endmill) it bogs the motor down and breaks the EM. yesterday i ran a complete 5x8 plate with no problems and when i loaded the next part it has broken 5 endmills the same way and just a few minutes ago it broke a .032 in carbon fiber!!  713 444 6958 Marcus  mantisworx@hotmail.com

Offline Flyer5

  • Active Member
  • Posts: 4
    • View Profile
Re: Phone support
« Reply #3 on: June 30, 2010, 07:54:46 AM »
????? Are you offering support or requesting it?????

RICH
   Requesting help .Thanks

Offline Flyer5

  • Active Member
  • Posts: 4
    • View Profile
Re: Phone support
« Reply #4 on: June 30, 2010, 12:10:28 PM »
????? Are you offering support or requesting it?????

RICH
   Requesting help .Thanks
????? Are you offering support or requesting it?????

RICH
   Requesting help .Thanks


    Never mind I found the error of my ways, Thanks ,Dave