Hello Guest it is September 15, 2019, 01:38:23 PM

Author Topic: Adding tools to your library  (Read 2412 times)

0 Members and 1 Guest are viewing this topic.

Adding tools to your library
« on: July 02, 2010, 11:19:10 AM »
Hi Everyone
I am new and I have been to the mach3 web site and I watced some videos
This is a subject that I didnt see there
Adding tools to your library

Also if those videos are a bit technical if anyone has something more simple maybe you can give  me the link to that
Thanks

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Adding tools to your library
« Reply #1 on: July 02, 2010, 02:20:25 PM »
You can enter the data manually into the tooltable or some people use a touch pad and a macro to enter the data.
I think the manual may have some info on this.
Hood
Re: Adding tools to your library
« Reply #2 on: July 02, 2010, 07:57:21 PM »
Hi Hood
I had been on the mach web site but I never realized that there was a manual
Thanks for that info
The thing is there are so many sections to that manual
would you know where that info would be
Thanks again

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Adding tools to your library
« Reply #3 on: July 03, 2010, 03:49:05 AM »

The thing is there are so many sections to that manual
would you know where that info would be
Thanks again

Afraid not I have never read it  ;D
But would imagine if you Ctrl F in the PDF and search for Tooltable you will find something.

Hood