Hello Guest it is March 28, 2024, 11:59:46 AM

Author Topic: Announcement: MachStdMill screen set - release target  (Read 19081 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Announcement: MachStdMill screen set - release target
« Reply #20 on: June 22, 2010, 07:03:40 PM »
Dave not to wory (;-) I DO HAVE a simple hi contrast screen set. One for mill one for Turn one for router one for plasma,etc. I also have a copy look alike of MOST of teh commercial controllers as best as it can be done. (;-)

I was just tugging on SuperDaves  cape (;-)

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Announcement: MachStdMill screen set - release target
« Reply #21 on: June 22, 2010, 07:05:28 PM »
lol! I see, I figured as much-

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Announcement: MachStdMill screen set - release target
« Reply #22 on: June 22, 2010, 07:08:46 PM »
Heck with "Mach Screen" it is a treat to do screen sets COMPARED to Scream4 (;-)
Re: Announcement: MachStdMill screen set - release target
« Reply #23 on: June 28, 2010, 11:53:07 PM »
Hello,

was the cnc workshop already done ? what happen goods in this workshop ?

Thanks for some feedback,

Fabrice
Re: Announcement: MachStdMill screen set - release target
« Reply #24 on: June 29, 2010, 10:18:25 PM »
Hi,
We demonstrated the MachStdMill package at the CNC workshop last week and the reactions were very positive.
The router that ArtSoft had at the show ran MachStdMill all week.

In addition to the equipment in the ArtSoft booth, two sessions at the workshop showed the software. It was part of Brian's "futures of Mach3 talk" and I gave a 2 hr talk on using the features in MachStdMill (which the audience stretched to 3 1/2 hours)  ;-)
 
During the week a couple of things did crop up & they have been fixed.
Yet, there are still a couple of known issues that we want to sort out before the general beta release.
Additionally, there is also a fellow doing another detailed proof read of the manual - and I'd like to get those edits into the doc before release (it takes a while to proof read 160+ pages of technical info).

We had hoped to release the package this week, but my crystal ball says that with the combination of July 4th weekend, my time to get the open issues written up and sent to Brian, and then Brian needing some time to look into them, well, I honestly suspect the beta release it will slide into the week after the holiday weekend.

Stay tuned - we're close!

Dave
Author of the MachStdMill Extensions for Mach3
www.CalypsoVentures.com
Re: Announcement: MachStdMill screen set - release target
« Reply #25 on: July 07, 2010, 03:49:10 PM »
Starting to drooll in anticipation...... :)
You can "chop it off" but can't "chop it on"
Re: Announcement: MachStdMill screen set - release target
« Reply #26 on: July 09, 2010, 06:56:13 PM »
Hi -
Status update:
I have the MSM part 99% ready to go.

Brian has the hard part at the moment... There isn't a revised 3.43.x yet so the release will be held up a bit.
(During the past week Brian said something about a heat wave in Maine and something about he and the computers melting into puddles. As I live in Calif, my understanding is that in Maine, a heat wave is anything above freezing <grin> ).

In any case, as soon as there is a revised Mach release, I'll do the MSM testing of the changes to verify the targeted bugs are gone and then we will get the package posted.

Dave


 
Author of the MachStdMill Extensions for Mach3
www.CalypsoVentures.com

Offline astr

*
  •  30 30
    • View Profile
Re: Announcement: MachStdMill screen set - release target
« Reply #27 on: July 12, 2010, 04:23:20 PM »
Dave, I attended your sessions at the workshop and came away very impressed.  I'm looking forward to getting V4 installed on my Bridgeport and actually cutting some metal!

Andy
Re: Announcement: MachStdMill screen set - release target
« Reply #28 on: July 16, 2010, 10:40:08 PM »
For those watching this thread, the MSM beta is now available from the machsupport site.

The announcement is at
http://www.machsupport.com/forum/index.php/topic,15366.0.html

Dave
Author of the MachStdMill Extensions for Mach3
www.CalypsoVentures.com