Hello Guest it is August 20, 2019, 05:33:17 PM

Author Topic: vb for g31  (Read 2419 times)

0 Members and 1 Guest are viewing this topic.

Offline jve

*
  •  128 128
    • View Profile
vb for g31
« on: June 21, 2012, 02:07:48 AM »
hi guys
i am trying to make a vb but no luck what i want to do is when i have a G31 in my code i need to activate a output and when it is ready deactivate the output is this possiple
regards
jekran

Offline jve

*
  •  128 128
    • View Profile
Re: vb for g31
« Reply #1 on: June 21, 2012, 10:45:15 AM »
i can also have in the code m31 and g31 so i can make a macro m31 can any one help me do this ?

Offline jve

*
  •  128 128
    • View Profile
Re: vb for g31
« Reply #2 on: June 21, 2012, 02:26:44 PM »
it seems i dont have luck here too

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: vb for g31
« Reply #3 on: June 21, 2012, 03:29:44 PM »
What exactly are you wanting to do? You said switch an output then off again when its ready but what makes it ready?
Hood

Offline jve

*
  •  128 128
    • View Profile
Re: vb for g31
« Reply #4 on: June 21, 2012, 11:33:31 PM »
What exactly are you wanting to do? You said switch an output then off again when its ready but what makes it ready?
Hood
OK sorry for not explaining my self  so i could have in the code G31 M31 , so this means that the machine is going to digitize the z axis and call a macro which i called it M31 so i don't confused with the others
now when i have G31 M31 in my code i want the machine to give a output and when the digitize led come active the output will go off that's all i need i been searching all day yesterday to find some thing similar but no luck

Offline jve

*
  •  128 128
    • View Profile
Re: vb for g31
« Reply #5 on: June 22, 2012, 03:23:10 AM »
i am trying to this macro but with no luck


Sub main ()
ActivateSignal (output4)
while ismoving()
wend
'system wait for (probe)
while not (isactive(probe))
wend
deactivateSignal (output4)
end sub
main