Hello Guest it is March 28, 2024, 10:06:58 PM

Author Topic: Homing slaved axis  (Read 2449 times)

0 Members and 1 Guest are viewing this topic.

Homing slaved axis
« on: April 10, 2010, 06:33:04 PM »
Hi all...

On a gantry machine if I have and X and A axis and I use RefCombination(9), will it home the first switch to hit home then the other switch?   Or will it always home the X first then the A?  If the latter is true, I'm wondering what happens if the A switch hits home first.  Seems that it would over-run the A switch a little and home the X, but then with the A switch already activated, how would it then home the A side?  I'm considering changing to a two motor system and want to make sure I understand how slaving works.

Thanks very much.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Homing slaved axis
« Reply #1 on: April 10, 2010, 09:19:46 PM »
They home at the same time, but independently.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html