Hello Guest it is March 28, 2024, 03:25:15 PM

Author Topic: getting started with Lazy Turn  (Read 17498 times)

0 Members and 1 Guest are viewing this topic.

getting started with Lazy Turn
« on: March 30, 2010, 07:00:28 AM »
Hi everyone
I am new to mach 3.  I am trying to use Lazy turn to generate Gcode to run a lathe.  I can inport a GXF file select tool, generate a roughing cuts, finishing cut etc. but can not generate a G code listing at the end.  when I select "post"  a file is created but the file is blank.  Please can someone tell me what I am doing wrong.

Steve

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: getting started with Lazy Turn
« Reply #1 on: March 30, 2010, 11:16:53 AM »
Steve,
GXF? you mean DXF...
Do you have the latest / free version of LazyTurn installed? see the manual for instructions located in Members Docs as it was updated / Rev 7
Section 4.5

Posting code- Section 5.16

Post the DXF file and i will take a look at it .

RICH
Re: getting started with Lazy Turn
« Reply #2 on: March 31, 2010, 01:17:23 PM »
Sorry, but could some direct me to the "Members Docs for LazyTurn" I have now idea where to find this

Thanks,

Jeff E.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile