Hello Guest it is March 29, 2024, 08:44:29 AM

Author Topic: How to insert a Userdefined (intelligent) Label  (Read 2287 times)

0 Members and 1 Guest are viewing this topic.

How to insert a Userdefined (intelligent) Label
« on: March 25, 2010, 08:22:14 AM »
Hello,

i know how to set / get Data from a Userdefined Label (SetUserlabel 1 , "Hello")

But i do not know how to insert a label into the screen of mach 3...?

Just an example:

I want to place a label in the top left of the mach 3 screen.

I want to use the label to give textinformation to the user like "Program done" and so on.

How can i create / place a userdefined label?

Normaly i use MachSreen as editor, but i do not see something to insert userdefined label, only normal ones...

Thank you very much!!

Elgundis
Re: How to insert a Userdefined (intelligent) Label
« Reply #1 on: March 27, 2010, 07:21:02 PM »
Hi Jo  ;D

use a standard label and call it "UserLabel1"
Than you can refer on it, I just tried it :-)

Greets
Dirk