Hello Guest it is March 28, 2024, 05:03:51 PM

Author Topic: Can get spindle to respond  (Read 2497 times)

0 Members and 1 Guest are viewing this topic.

Can get spindle to respond
« on: March 18, 2010, 08:35:44 PM »
I am running Smooth Stepper with a Campbell card. I can power up the system and the spindle relay will be out and the spindle has zero volts.Am using step and direct signal. I can power up the spindle. Relay will pick up and respond to S command. I can shut off spindle. Relay drops out but .5 volt remains on 0 to 10 volt analog signal and spindle sits and just turns. It will still respond to S command. If I power spindle back up. It will not respond to M5 or to S0. What have I done incorrectly.
racear

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Can get spindle to respond
« Reply #1 on: March 19, 2010, 03:21:15 AM »
Can you attach your xml please.
Hood