Hello Guest it is August 20, 2019, 07:17:58 PM

Author Topic: mach2 gcode thc300 problems  (Read 2486 times)

0 Members and 1 Guest are viewing this topic.

mach2 gcode thc300 problems
« on: October 01, 2006, 04:26:02 PM »
when i load the gcode in mach 2 thc3000 all i see is a bunch of circles.  if i dont not use a the thc files and just run regular mach2 mill or mach 3  i can see the tool path just fine is the a setting i have to adust or something this is really weird

John

Offline Graham Waterworth

*
  • *
  •  1,865 1,865
  • Yorkshire Dales, England
    • View Profile
Re: mach2 gcode thc300 problems
« Reply #1 on: October 02, 2006, 01:28:32 AM »
it sound as is you have absolute I & J set when you should have it incremental, check this on the settings

Graham.
Without engineers the world stops
Re: mach2 gcode thc300 problems
« Reply #2 on: October 02, 2006, 11:01:14 AM »
you are exactly right that fixed the problem thank you so much

John