I am in the process of setting up my mill and my x-axis seems to be getting "stuck"
My hardware is a desktop pc with windows xp pro, Mach 3
hobby cnc pro board with the 305oz stepper motors.
when working with my x-axis in step mode(Diagnostics->Jog Mode) the motor will move very smoothly with no problems. But when the jog mode is set to Cont. the motor will move a tiny bit then get stuck. If any more information in needed please let me know. The motor is also having the same issue when I have been trying to set up steps per unit. It will also get stuck with no load on the motor
Thanks