Hello Guest it is June 02, 2020, 10:55:06 AM

Author Topic: Lathe Probe  (Read 5407 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,409 7,409
    • View Profile
Re: Lathe Probe
« Reply #10 on: February 15, 2010, 10:07:41 AM »
Russ,
Sooner or later, as i don't have a turret, i will do something as tool changes become a PITA if you using LT
or any other Cam software. May try making a turret using the gears out of a ratchet wrench ( talk about cheap
) since it will need to be a small for what i do.  Any way, just cheap thoughts of the day.....
RICH