Hello Guest it is July 06, 2020, 05:08:53 PM

Author Topic: Upgrading from Mach2 to Mach3 - basic help - slow Z- Jog, etc.  (Read 7174 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,932 6,932
    • View Profile
Re: Upgrading from Mach2 to Mach3 - basic help - slow Z- Jog, etc.
« Reply #10 on: September 12, 2011, 09:43:53 AM »
I don't think by adjusting the Z axis that it will cause too much problems with cycle times.


(;-) TP
Re: Upgrading from Mach2 to Mach3 - basic help - slow Z- Jog, etc.
« Reply #11 on: September 17, 2011, 12:22:42 PM »
This was just what it needed.  Thanks!

YOU would  set the Rapid down in config motor tuning Z lower the vel number. THAT is what limits your top rapid speed.

(;-) TP