Hello Guest it is March 29, 2024, 04:29:41 AM

Author Topic: Lathe Config  (Read 2491 times)

0 Members and 1 Guest are viewing this topic.

Offline Ken K

*
  •  11 11
    • View Profile
Lathe Config
« on: February 07, 2010, 11:37:03 PM »
 I am running a Taig mill with  Mach3 mill, and it is running fine. I now have a CNC lathe, which I am running from the same control er, and stepper motors as the mill. The problem I am having is when I use Mach3 lathe the stepper motors only move the lathe X, and Z about 1/3 of the distance called for, in the code. The screen show it has move the distance called for. Any help for this problem?
Ken K

Offline Ken K

*
  •  11 11
    • View Profile
Re: Lathe Config
« Reply #1 on: February 08, 2010, 12:54:58 AM »
 Found my problem, it was in the motor speed control.
Ken K