Here is the finished screen set for 1280x1024. Follow the instructions in post #7 and #20 for installation.

Zafar

Dear Sir

Thank for your new screen set. But my monitor cannot support 1280x1024 resolution. My monitor screen size is 15 inches and only support 1024x768 resolution maximum. So, I cannot use your new screen set.
I cannot find x/2, y/2 z/2 buttons in your new screen. This button is very useful to offset the center of workpiece. But this screen set is really great.

High Tech Key

Work is underway for the 1024 screen set. Give me a week for that. The x/2, y/2 and z/2 can be carried out by clicking on the dro and typing /2<enter>. You can do simple arithmatics on the dro with mach3's versions later than 3.042.020. That's why I didn't include this button here.

Zafar

Another thing I forgot to mention is you can hide and unhide main menu bar in this version by clicking on the first and last "C" of KaraCNC on the top. The hotkeys are Ctrl-Alt-N and Ctrl-Alt-M.

Dear Sir

Thank for your reply. I will wait your 1024x768 screen set. I upload the photos of my machine with your screen set. The older CNC control is Anilam 3000M and I retrofit with Mach3. I need some modification with this system.

High Tech Key

Dear Sir

Here is next two....

High Tech Key

That's a nice machine you've got. Looks like you've replaced the axis drive motors. Are these AC servo? My machine is almost ready too. I'll take a few snaps today and post them here.

Zafar

I see a hand held game controller on top of your monitor box. Which controller is that. Is it hooked to Mach?

Zafar

Dear Zafar

Yeath... I replaced axis drive motors. These motor are AC servo motors from china. I will post some photos of my control boxes later. I use joystick to control the axis movement and some functions. It is really work and great. I connected this controller with Mach3 using KeyGrabber.

High Tech Key

Dear Sir

I upload some photos of the control box of my CNC.

High Tech Key