Hello Guest it is November 30, 2020, 02:51:41 PM

Author Topic: Tool changer setup using mach  (Read 1944 times)

0 Members and 1 Guest are viewing this topic.

Tool changer setup using mach
« on: February 01, 2010, 09:16:40 AM »
Hey everyone,
I bought a CNC router that has been used with a tool changer bay/rack.  The rack/bay is missing but i would like to set it up.  I'm not sure as how to approach this, the company this router came from had setup the tool change sequence but it's beyond the limit switch.  The machine can physically go beyond the limit switch but i don't know how to tell the machine to do this.  Any help would be much appreciated.

Alex