Hello Guest it is March 28, 2024, 05:37:38 AM

Author Topic: using mdi  (Read 4012 times)

0 Members and 1 Guest are viewing this topic.

using mdi
« on: January 25, 2010, 06:18:44 PM »
Hey, I'm configuring an upgrade solving some glitches and found this one. When entering code into the MDI window the moment I enter the letter Z the window turns gray and blanks all previous entries. For example: Enter g1x1y1z......, the window turns gray and blank when I enter z. Strange. Any ideas?

Jim
Re: using mdi
« Reply #1 on: January 25, 2010, 06:24:52 PM »
Maybe you have the letter Z associated with some hot key.

Look at the hot key page under config.

Jeff
Re: using mdi
« Reply #2 on: January 25, 2010, 06:42:20 PM »
thats an idea. i'll check that.
Re: using mdi
« Reply #3 on: January 25, 2010, 07:02:56 PM »
thats an idea. i'll check that.
Re: using mdi
« Reply #4 on: January 25, 2010, 07:13:13 PM »
Hey Jeff, you get a gold star. Somehow I made z a hot key. Must have been by accident.

Thanks,
Jim
Re: using mdi
« Reply #5 on: January 25, 2010, 08:05:30 PM »
Was my pleasure, happy to help

Jeff