Hello Guest it is May 09, 2021, 07:11:05 AM

Author Topic: M5 Spindle Does Not Stop  (Read 2796 times)

0 Members and 1 Guest are viewing this topic.

M5 Spindle Does Not Stop
« on: September 21, 2006, 11:52:22 AM »
M3 amd M4 work fine. E/stop switch stops the spindle, but M5 does not stop the spindle.
Only way seems to input in program a spindle speed of 0. Then it works.
Checked with Art and the M5 macro is as standard ie not corrupted.
Any suggestions?
Re: M5 Spindle Does Not Stop
« Reply #1 on: September 21, 2006, 07:29:26 PM »
There should be  DoSpinStop() in the M5 macro. could you please check it

Fixing problems one post at a time ;)