Hello Guest it is March 28, 2024, 01:18:39 PM

Author Topic: Returning to 0,0,0 question  (Read 2848 times)

0 Members and 1 Guest are viewing this topic.

Returning to 0,0,0 question
« on: January 01, 2010, 12:33:46 PM »
How do I change the order of which axis returns to 0 first?  For example currently it is X & Y first then Z last, but I would like for it to be Z first then the other two axis.

Thanks
Re: Returning to 0,0,0 question
« Reply #1 on: January 01, 2010, 12:55:55 PM »
You have to edit the VB code

You do OPERATOR, EDIT BUTTON SCRIPT

All the buttons start flashing you just select the one you want

You have to be on the page that has the button you want to edit

Then just swap them around to suit

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Returning to 0,0,0 question
« Reply #2 on: January 01, 2010, 01:40:11 PM »
Just turn on SafeZ
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Returning to 0,0,0 question
« Reply #3 on: January 01, 2010, 03:30:21 PM »
Thanks