Hello Guest it is April 20, 2024, 06:27:05 AM

Author Topic: Dust Shoe  (Read 3634 times)

0 Members and 1 Guest are viewing this topic.

Dust Shoe
« on: January 17, 2010, 01:04:40 PM »
Below is a link to a video of a dust shoe that does an excellent job of collection while allowing easy access for bit changes. The lower brush ring is attached with rare earth magnets which allows for easy bit access. The upper acrylic plate clamps around the router/spindle with one pinch screw.The shoe sells for $95.00 plus $15.00 S&H (additional shipping applies if outside the U.S.).  If you are running the Hitachi M12VC router, the cooling exhaust blows straight down and needs to be diverted. An exhaust diverter for that router is an additional $10.00

Contact me at KentCNC@gmail.com to purchase. I will need to know which router/spindle you are using and your name and shipping address.

Video Link: http://www.youtube.com/watch?v=t8ehFKTjZN4