Hello Guest it is March 29, 2024, 09:43:22 AM

Author Topic: Re-useable lists of Parameters for use in G-Code files  (Read 7011 times)

0 Members and 1 Guest are viewing this topic.

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Re-useable lists of Parameters for use in G-Code files
« Reply #10 on: November 14, 2009, 05:51:27 PM »
Have a look here, mach3 is based on the Fanuc 6 system type a16, i.e. it has no conditional commands or loops and no I/O commands

http://www.machinetoolhelp.com/Applications/macro/macro_variables.html

Graham
« Last Edit: November 14, 2009, 05:54:49 PM by Graham Waterworth »
Without engineers the world stops
Re: Re-useable lists of Parameters for use in G-Code files
« Reply #11 on: November 15, 2009, 04:16:37 PM »
Ok, clearer now, thanks!

Occassionally I have seen on one of the links there that there is G47 for text/serial No. engraving... Mach does not support this for the moment, right? (btw. there is text engraving wizard, which does not give any output)