Hello Guest it is February 06, 2023, 04:07:10 AM

Author Topic: ESS w/MB3 break out board/ Mach3/ encoder issue  (Read 61 times)

0 Members and 1 Guest are viewing this topic.

ESS w/MB3 break out board/ Mach3/ encoder issue
« on: January 17, 2023, 12:41:23 PM »
Hello
I have an MB3 break out board with ethernet smoothestepper.  I have temporarily wired up a quadrature linear encoder to the mb3 input, and configured the ports in pins in mach/config ports and pins/encoders/encoder 1.  When i move the linear encoder, i get no change in thr DRO under mach settings tab/dros, or under the ethernet smoothestepper dats monitoring plug in/encoders.  The built in LEDS on the MB3 break out board do illuminate on the pins associated with phases A and B of the encoder.  Im stumped 🤔

Thanks,
Jason