You trying to set as OEM triggers? if so you dont use Inputs, you need to use OEM Triggers.
Hood

yes they are set up in hotkeys oem trigers.
pins 2&3 are the mpg a&b

Even if I go to automated setting it does not register as a button being pressed when its scanning.

Yes but on the Ports and Pins, Inputs page have you set them up as Input 7, 8, 9 and 10? If yes then that is no use, you need to use OemTrigger 1, 2 3..... 14, 15 etc

Hood

they are set as oem triggers I am not using the 4 input#

Should work then, not looked up the OEM codes but if they are correct it should work.
If you want to attach your xml I will see if I can test when I get home.

Hood

try that cheers

Just to throw some more wierdness in the pot,I have just dropped the xml and the pendant onto another
computer with a second PP and the oposite group of triggers dont work ie 2-9 whereas 10-15 functions do??

Just to throw some more wierdness in the pot,I have just dropped the xml and the pendant onto another
computer with a second PP and the oposite group of triggers dont work ie 2-9 whereas 10-15 functions do??

That is quite possible as your card may not support or be set up for Bi-Directional use. I had one card that could not be set up that way so I just used the motherboards port as Port 2 and used the PCI as Port 1.
 Hood

Afraid I cant find the PCI Parallel port to test Had a look through your xml and dont see anything wrong, maybe as a test set your motherboards port as port 2 and see if the signals are seen correctly.
Hood