Hello Guest it is March 29, 2024, 09:40:30 AM

Author Topic: Different Cuts  (Read 6379 times)

0 Members and 1 Guest are viewing this topic.

Offline kolias

*
  •  1,154 1,154
    • View Profile
Re: Different Cuts
« Reply #10 on: September 15, 2009, 12:44:45 AM »
On the ‘Program Run” screen press the ‘M-Codes’ button at the bottom of the page and you will see that M30 is ‘Program end and rewind’. Thus your last line is beyond the end of your file and won’t ever be executed. Move it up a line so it is run before the end of the file (M30) and you should be OK.
HTH
al


Thank you Al
Nicolas