Hello Guest it is March 28, 2024, 09:37:45 AM

Author Topic: Where to download r3.042.020  (Read 6906 times)

0 Members and 1 Guest are viewing this topic.

Where to download r3.042.020
« on: September 01, 2009, 01:57:24 PM »
Hello all. Where specifically can I download mach version r3.042.020 ?  This seems to be the most recommended version for current use(with the smoothstepper at least), but I can not seem to find a link to the actual download. I did check the FTP site. If it is there, could someone please paste a direct link?
Thank you,
Frank

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Where to download r3.042.020
« Reply #1 on: September 02, 2009, 03:26:11 AM »
I use ver 027 on my mill and I think 022 on the lathe. No real reason why I have an older version on the lathe other than no changes have been made which would make the lathe better so not updated.
 If you PM me your email address I can send you ver 020 or whatever you want ( have most I think).
Hood

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Where to download r3.042.020
« Reply #2 on: September 02, 2009, 07:27:33 AM »
Version 020 can be download from the     DOWNLOADS      link above. I have been using O27 on both the lathe and mill with no problems.
RICH

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Where to download r3.042.020
« Reply #3 on: September 02, 2009, 07:40:59 AM »
Version 020 can be download from the     DOWNLOADS      link above. I have been using O27 on both the lathe and mill with no problems.
RICH

You talking about the downloads page? Havent seen it there for a while unless I am looking in the wrong place.
Hood

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Where to download r3.042.020
« Reply #4 on: September 02, 2009, 07:43:28 AM »
Hood,
I just looked again and it's listed there as the lockdown version.
RICH

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Where to download r3.042.020
« Reply #5 on: September 02, 2009, 07:53:37 AM »
Rich 029 is the lockdown when I look, try refreshing your browser.
Hood

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Where to download r3.042.020
« Reply #6 on: September 02, 2009, 08:13:05 AM »
Refreshed and got 029 like you said.  ;)
RICH

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Where to download r3.042.020
« Reply #7 on: September 02, 2009, 08:22:12 AM »
Take it you must be using Internet Explorer, its bad for that, you have to dig into the options to set it to refresh on each new view of a page, if not then you can go a long time and not see that things have been updated.
Hood
Re: Where to download r3.042.020
« Reply #9 on: September 04, 2009, 01:11:55 AM »
Thank you for the help with this guys!!!

Out of curiosity, where is the directory for that download? In other words, how did you find it.

Thanks again
Frank