Hello Guest it is October 16, 2019, 08:39:26 AM

Author Topic: Please, just a little help to learn Macro programming.  (Read 2680 times)

0 Members and 1 Guest are viewing this topic.

Please, just a little help to learn Macro programming.
« on: June 23, 2010, 10:59:44 PM »
Hi,

I need to learn how program macros for Mach 3.

I know that exists

1- Macro Programming reference
2-Oem CODEs for Mach 3

I know than for programming Macros in Mach is needed some knowledge of Visual Basic and
Visual Basic Scripts. I studied for about 6 month in 1985, when I was in university Basic
Programming for NEC PC9801, but this is an old story because I was never use anymore.

Recently I downloaded a end user manual containing a Cypress enable, I figure that in this
manual are the same instructions that in VBscripts manuals,
What is CYpress enable?

I have a lot of information  in hands but I don't know how to order for beginnig studies.

I need if you can give me a guide to consecutivelly study all manuals, because a have
 
1-VBasic6.0 course (spanish)
2- VB script course (spanish)
3-manual containing a Cypress ENABLE (english)
4-Macro programming reference (english)
5-OEM codes (english)
6-A Program words for Mach programming. (english)

Just give me a guide for where start and where should I finish, and what is that exactly will I
need for Mach 3 programming.

I know what I need that Mach 3 does for me , but I don't know how to ask  him about it.......

Thanks in advance, sorry my bad english

Regards

Rene
« Last Edit: June 23, 2010, 11:02:37 PM by renenpaz »
Re: Please, just a little help to learn Macro programming.
« Reply #1 on: June 24, 2010, 04:22:46 PM »
Hi Rene,

Here is a real good place to start reading for writing VB code for Mach3:  http://www.machsupport.com/MachCustomizeWiki/index.php?title=Main_Page

airnocker

Everything depends on everything else
Re: Please, just a little help to learn Macro programming.
« Reply #2 on: June 24, 2010, 05:13:08 PM »
Rene,
Download some macros others have written and study them.  That's how I did it, although I have been programming in VB.net for a while.   Understanding Mach3 was the biggest challenge for me. 

Good Luck,
John Champlain
Re: Please, just a little help to learn Macro programming.
« Reply #3 on: June 24, 2010, 10:29:22 PM »
Hi,
thanks Airnocker and Picengraver,

I will take your advices.

Whrere can I download macros written,,,here in Mach forum only , or are other places where download.?

Regards
Rene

Re: Please, just a little help to learn Macro programming.
« Reply #4 on: June 24, 2010, 10:38:01 PM »
Rene, you should find a lot right here on this forum, but I also used Google to search for "Mach3 VB scripts".

Good luck
airnocker

Everything depends on everything else
Re: Please, just a little help to learn Macro programming.
« Reply #5 on: June 24, 2010, 10:39:44 PM »
AIRNOCKER, I will search.

Thanks

Rene