Hello Guest it is September 19, 2020, 06:59:28 PM

Author Topic: PC SHUTS DOWN  (Read 2194 times)

0 Members and 1 Guest are viewing this topic.

Offline spnar

*
  •  52 52
  • Little workshop on a little island
    • View Profile
PC SHUTS DOWN
« on: August 01, 2009, 12:30:25 PM »
Hi

While cutting a 3d model Mach just closed and the PC preceded to shut down.
This it did twice.
I checked windows settings regarding hibernation etc and all the settings are switched off including screen saver.
I am using Windoes XP.


 ???






Offline Hood

*
  •  25,846 25,846
  • Carnoustie, Scotland
    • View Profile
Re: PC SHUTS DOWN
« Reply #1 on: August 01, 2009, 02:50:56 PM »
That is very strange indeed as I dont think windows can shut down normally if the driver is running. Does windows crash?
Hood

Offline spnar

*
  •  52 52
  • Little workshop on a little island
    • View Profile
Re: PC SHUTS DOWN
« Reply #2 on: August 02, 2009, 02:14:49 PM »
Hi Hood

Strange indeed.

The only thing i found was some G00 commands at a very high speed way above what the motor maximum is configured.
I edited these and the problem never came back.
I am trying out Vectric CUT3D using some of the demo files they have and apart from this all looks well.

Spnar ;)